U Type Butterfly Valve PN10/16

DN80 to DN1200 PN10/16 Temp –20ºC to 70ºC FBE Pin

Manufactured to: BS EN ISO9001:2015 QMS and ISO 14001:2004 EM Design Standard: EN593 & BS5155 F/F EN558 Series 14

More Info

Comprehensive range of materials and sizes from PN10/16
Available with wide range of actuation andoperating gear
Face to Face: EN 558-1, Series 20
Flanges: BS EN 1092-2
Mounting Flange: BS EN ISO5211
Test Standards: EN 12266, API 598
FBE Coated to a minimum of 250 μm

Ball Valves

Size Range: 6 -1200mm Operation: Lever, gearbox, electrically actuated, pneumatically actuated single acting spring return and double acting, hydraulically actuated single acting spring return and double acting. Rigid extension spindles, lagging extensions Connections: Butt weld, socket weld, hygienic connections, BSP, NPT, ANSI B16.5 RF, flat face and RTJ ASA125 / ASA150 / ASA300, BS4504 PN6 / PN10 / PN16 / PN25 / PN40

RSGV DN50-DN300 – ISO Top

Resilient seat wedge gate valve for pipeline isolation. Suitable for potable water.

Size Range : DN50-DN300 Pressure Rating : PN16

Resilient seat wedge gate valve to BS5163
Flanged EN1092-2 PN16
Face-to-face according to BS EN 1092-2 Table 9
Prepared with ISO5210 Interface

Swing Check Valve – Resilient Seated DN50 to DN1000

PN10/16 Temp –20ºC to 70ºC DN50 to DN1000

Swing Check Valve is used as protection against reverse flow. A swing check valve consists of a mounted disc that operates with a hinge or shaft. Forward flow swings the disc off the seat. No flow results in the disc swinging back to seal and prevent reverse flow. The weight of the disc and the forward flow impacts the performance of the valve.