Non Slam Check Valve DN50 to DN1200
- Home
- Non Slam Check Valve DN50 to DN1200
About Product
DN50 to DN1200 PN16/25 -10°C to 70°C
NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss.
More Info
- High strength ductile iron body used for durability and less weight
- Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss
- One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stoke and spring reverse faster than most other check valve.
- Coated with powder epoxy both inside and out for corrosion resistance
- Bronze bushing reduce wearing problem during operation
- Hydrodynamic design with spring ensures non slamming and water hammerless
- Stainless steel spring hidden in the diffuser under protection while valve is in operation
- Disc will positively close before flow, and maximize the closing speed up to 0.2 Sec
- Installation can be vertical / horizontal /inclined. For size DN800 and up preferred vertical installation.
This Product does not have data sheet.
Related Products
Ball Valves
Size Range: 6 -1200mm
Operation: Lever, gearbox, electrically actuated, pneumatically actuated single acting spring return and double acting, hydraulically actuated single acting spring return and double acting. Rigid extension spindles, lagging extensions
Connections: Butt weld, socket weld, hygienic connections, BSP, NPT, ANSI B16.5 RF, flat face and RTJ ASA125 / ASA150 / ASA300, BS4504 PN6 / PN10 / PN16 / PN25 / PN40
MSGV DN80-DN300 – ISO Top
Metal seat wedge gate valve for pipeline isolation. Suitable for water, wastewater and sewage duties.
- Size Range ND80- DN300
- Metal seat wedge gate valve to BS5163/EN1074
- Flanged EN1092-2 PN10/16
- Face-to-face according to EN558 S3
- ISO Top prepared for actuation – ISO 5210 Interface
- Non-rising stem design
RSGV DN50-DN300 – ISO Top
Resilient seat wedge gate valve for pipeline isolation. Suitable for potable water.
Size Range : DN50-DN300
Pressure Rating : PN16
- Resilient seat wedge gate valve to BS5163
- Flanged EN1092-2 PN16
- Face-to-face according to BS EN 1092-2 Table 9
- Prepared with ISO5210 Interface