Air Valve – Double Orifice, Triple Function DN50-DN300 PN16
- Home
- Air Valve – Double Orifice, Triple Function DN50-DN300 PN16
About Product
Flow Media – Clean Water
Applications – Water systems, firefighting and irrigation systems
Manufacture: BS EN ISO 9001:2015 QMS ISO 14001:2004 EM
Design Standard: BS EN 1074 -4 AWWA C512
More Info
- Flange Drilling in accordance to BS EN1092-2
- Manufacturing standards meets BS EN 1074-4 and AWWA C512
- Also available in PN25 & PN40
- Body Ductile Iron
- Fasteners Stainless Steel
- Strong Float to prevent damage during water hammer
- No Arms or levers – prevents vibrating, bending of the float
- Smooth cage outside of float to keep float moving in guide rail
- Bottom rubber buffer for collision prevention
- Outside screen to prevent ingress of insects etc
- Fully FBE coated inside and outside 250 μm
This Product does not have data sheet.
Related Products
Dual Plate Check Valve DN50 – DN700
Size Range :
Pressure Rating : PN16
- DN200 – DN700 fitted with lifting eye
- Wafer Type
- Resilient Seated
- End flange in accordance to EN1092-2, PN16
- Face to Face in accordance to EN558-1, Series 16
KV7 Knife Gate Valve
Resilient seated Knife Gate Valve providing tight shut-off on a broad range of slurries from heavy sludges to clean fluids, primarily used in thermal hydrolysis plants.
Resilient seated knife gate valve providing tight shut-off, primarily used in thermal hydrolysis plants (THP)
Size Range : 50 – 700mm
Pressure Range – PN16 Standard, PN25 and PN40 on application
- Slurries
- Sludges
- Suspended Solids
- Clean Fluids
- Resilient Seated
Swing Check Valve – Resilient Seated DN50 to DN1000
PN10/16 Temp –20ºC to 70ºC DN50 to DN1000
Swing Check Valve is used as protection against reverse flow. A swing check valve consists of a mounted disc that operates with a hinge or shaft. Forward flow swings the disc off the seat. No flow results in the disc swinging back to seal and prevent reverse flow. The weight of the disc and the forward flow impacts the performance of the valve.