Blind flange | Type 05
- Home
- Blind flange | Type 05
About Product
Blind flanges according to EN1092-1 Type 05 (DIN 2527) are often used in installations, piping systems or in equipment construction to close an open pipe end. Nijhuis & Wigger can supply suitable blind flanges for every quality, pipe size and pressure class.
More Info
- Available pressure classes PN 6 – PN 100
- Higher pressure classes (outside EN-standard) available with corresponding thickness
- Different sealing surfaces available like Nut (Form D) or according specification
- Dimensions up to DN 2000
- Stock item (see stock programme in downloads)
We deliver blind flanges in the following material grades:
DIN standard | EN standard | ||||||||||||||||||||||||||||||||
Carbon steel | |||||||||||||||||||||||||||||||||
C22.8 | P250GH | ||||||||||||||||||||||||||||||||
Rst 37.2 | S235JRG2 | ||||||||||||||||||||||||||||||||
15Mo3 | 16Mo3 | ||||||||||||||||||||||||||||||||
13CrMo44 | 13CrMo4-5 | ||||||||||||||||||||||||||||||||
W/TSTE 355 | P355QH1 | ||||||||||||||||||||||||||||||||
P355NL1 | |||||||||||||||||||||||||||||||||
P355NH | |||||||||||||||||||||||||||||||||
10CrMo9-10 | 11CrMo9-10 | ||||||||||||||||||||||||||||||||
Stainless steel | |||||||||||||||||||||||||||||||||
1.4301 / 1.4307 / 1.4541 | |||||||||||||||||||||||||||||||||
1.1104 / 1.4404 / 1.4571 | |||||||||||||||||||||||||||||||||
1.4462 (Duplex) | |||||||||||||||||||||||||||||||||
1.4501 (Superduplex)
Standards
According to the standard DIN/EN1092-1 blind flanges are separated in:
|
This Product does not have data sheet.
Related Products
Loose flange | Type 02
Loose flanges according to EN1092-1 Type 02 (DIN 2641 – 2656) are often used in installations, piping systems or in equipment construction to weld on a pipe. Nijhuis & Wigger can supply suitable loose flanges for every quality, pipe size and pressure class.
Flat flange | Type 01
Flat flanges according to EN1092-1 Type 01 (DIN 2573 – 2576) are often used in installations, piping systems, appendages or in equipment construction to weld at the end of a pipe. Nijhuis & Wigger can supply suitable flat flanges for every quality, pipe size and pressure class.
Welding Neck flange | Type 11
Welding neck flanges according to EN1092-1 Type 11 (DIN 2627 – 2638) are often used in installations, piping systems, appendages or in equipment construction. Nijhuis & Wigger can supply suitable welding neck flanges for every quality, pipe size and pressure class.