Air Valve – Double Orifice, Triple Function DN50-DN300 PN16

Flow Media – Clean Water Applications – Water systems, firefighting and irrigation systems Manufacture: BS EN ISO 9001:2015 QMS ISO 14001:2004 EM Design Standard: BS EN 1074 -4 AWWA C512

More Info

Flange Drilling in accordance to BS EN1092-2
Manufacturing standards meets BS EN 1074-4 and AWWA C512
Also available in PN25 & PN40
Body Ductile Iron
Fasteners Stainless Steel
Strong Float to prevent damage during water hammer
No Arms or levers – prevents vibrating, bending of the float
Smooth cage outside of float to keep float moving in guide rail
Bottom rubber buffer for collision prevention
Outside screen to prevent ingress of insects etc
Fully FBE coated inside and outside 250 μm

This Product does not have data sheet.

Dual Plate Check Valve DN50 – DN700

Size Range : Pressure Rating : PN16

DN200 – DN700 fitted with lifting eye
Wafer Type
Resilient Seated
End flange in accordance to EN1092-2, PN16
Face to Face in accordance to EN558-1, Series 16

KV7 Knife Gate Valve

Resilient seated Knife Gate Valve providing tight shut-off on a broad range of slurries from heavy sludges to clean fluids, primarily used in thermal hydrolysis plants.

Resilient seated knife gate valve providing tight shut-off, primarily used in thermal hydrolysis plants (THP) Size Range : 50 – 700mm Pressure Range – PN16 Standard, PN25 and PN40 on application

Slurries
Sludges
Suspended Solids
Clean Fluids
Resilient Seated

Swing Check Valve – Resilient Seated DN50 to DN1000

PN10/16 Temp –20ºC to 70ºC DN50 to DN1000

Swing Check Valve is used as protection against reverse flow. A swing check valve consists of a mounted disc that operates with a hinge or shaft. Forward flow swings the disc off the seat. No flow results in the disc swinging back to seal and prevent reverse flow. The weight of the disc and the forward flow impacts the performance of the valve.