MSGV DN350-DN1200 – ISO Top

Metal seat wedge gate valve for pipeline isolation. Suitable for water, wastewater and sewage duties.

Size Range ND350 – DN1200
Metal seat wedge gate valve to BS5163/EN1074
Flanged EN1092-2 PN10/16
Face-to-face according to EN558 S3
ISO Top prepared for actuation – ISO 5210 Interface
Non-rising stem design

More Info

Epoxy coated ductile iron construction
Superior weld-on gunmetal seats
Clockwise to close and clockwise to open option available
Spindle seals replaceable under pressure
WRAS listed non-metalic components
Thrust taking integral ISO 5210 pad
Flange feet to facilitate safe storage
Air release and drain plug as standard
DN700 and above with spur gearbox
Lifting points Accessories

Accessories

Bevel / spur gearbox
Actuation
Extension Spindles
Chainwheels
Slippers and guides
Position indicator
Alternative flange drillings (BS10 & ANSI)
Jacking screws
Rising spindle

This Product does not have data sheet.

Dual Plate Check Valve DN50 – DN700

Size Range : Pressure Rating : PN16

DN200 – DN700 fitted with lifting eye
Wafer Type
Resilient Seated
End flange in accordance to EN1092-2, PN16
Face to Face in accordance to EN558-1, Series 16

RSGV DN350-D600 – ISO Top and Bypass

Resilient seat wedge gate valve with bypass for pipeline isolation. Suitable for potable water.

Size Range : DN350-DN600 Pressure Rating : PN16

Resilient seat wedge gate valve to BS5163
Flanged EN1092-2 PN16
Face-to-face according to BS EN 1092-2 Table 9
Prepared with ISO 5210 Interface

Swing Check Valve – Resilient Seated DN50 to DN1000

PN10/16 Temp –20ºC to 70ºC DN50 to DN1000

Swing Check Valve is used as protection against reverse flow. A swing check valve consists of a mounted disc that operates with a hinge or shaft. Forward flow swings the disc off the seat. No flow results in the disc swinging back to seal and prevent reverse flow. The weight of the disc and the forward flow impacts the performance of the valve.