Wafer Butterfly Valve PN10/16
- Home
- Wafer Butterfly Valve PN10/16
About Product
DN40 to DN600 PN10/16 Temp –20ºC to 70ºC
Manufactured to: BS EN ISO9001:2015 QMS and ISO 14001:2004 EM
Design Standard: EN593 & BS5155 F/F EN558 Series 14
More Info
- Face to Face: EN 558-1, Series 20, API 609
- Flanges: DIN 2501
- Bonnet Flange: ISO 5211
- Test Standards: EN 12266, API 598
- Corrosion Protection: FBE minimum 250 μm
Options DN40-300
Material: Shaft 1.4057 (SS431) Disc : Ductile Iron | Alum Bronze | CF8 (SS304) Seat: NBR | PTFE | Viton Coating: Nylon | Rilsan Body : Cast Iron GG 25 Op Gear : Lever | Gearbox | Hand WheelOptions DN40-600
Material: Stems 1.4021 (SS420), Higher Grades Disc : Ductile Iron | Alum Bronze | CF8 (SS304) Seat: NBR | PTFE Coating: Nylon | Rilsan Op Gear :- Carbon steel lever up to DN300
- Stainless steel lever (SS304 or SS316) up to DN300 Ductile Iron Gearbox and Hand Wheel
- Pneumatic Actuator
- Electric Actuator
Related Products
KV7 Knife Gate Valve
Resilient seated Knife Gate Valve providing tight shut-off on a broad range of slurries from heavy sludges to clean fluids, primarily used in thermal hydrolysis plants.
Resilient seated knife gate valve providing tight shut-off, primarily used in thermal hydrolysis plants (THP)
Size Range : 50 – 700mm
Pressure Range – PN16 Standard, PN25 and PN40 on application
- Slurries
- Sludges
- Suspended Solids
- Clean Fluids
- Resilient Seated
RSGV DN350-D600 – ISO Top and Bypass
Resilient seat wedge gate valve with bypass for pipeline isolation. Suitable for potable water.
Size Range : DN350-DN600
Pressure Rating : PN16
- Resilient seat wedge gate valve to BS5163
- Flanged EN1092-2 PN16
- Face-to-face according to BS EN 1092-2 Table 9
- Prepared with ISO 5210 Interface
U Type Butterfly Valve PN10/16
DN80 to DN1200 PN10/16 Temp –20ºC to 70ºC FBE Pin
Manufactured to: BS EN ISO9001:2015 QMS and ISO 14001:2004 EM
Design Standard: EN593 & BS5155 F/F EN558 Series 14